Blog

News center

A Basic Introduction to Electrofused Bricks


Release time:

2021-04-01

Electrofused bricks are produced by melting raw materials such as alumina bauxite in an electric furnace and then allowing the molten material to cool and solidify. They offer advantages such as simple processing, short production流程, and low product costs.

Depending on the specific type of electrofused corundum, different reducing agents can be added during the melting process. At temperatures approaching the corundum melting point (2100℃), the structure of the alumina melt is similar to that of corundum bricks; upon cooling, this melt crystallizes into corundum bricks. When corundum bricks are melted, the molar volume of the melt increases by 23.5%, and the heat of fusion is 109.2 kJ/mol. As the melt temperature rises, its density decreases.

Dense fused corundum is produced by melting industrial alumina with the addition of additives in an electric arc furnace. It has a gray, gray-black, or gray-white appearance, with an Al2O3 content of no less than 98%. Its apparent porosity is lower than that of fused white corundum, typically not exceeding 4%, and its bulk density is no less than 3.8 g/cm³. Dense fused corundum bricks are a new type of high-grade refractory material that exhibits resistance to acids and alkalis, maintains dimensional stability at high temperatures, and features dense particles and low porosity.

Due to improper operation and refining times, industrial alumina smelting may result in the over-reduction of Al2O3, leading to the formation of carbides. Carbides are harmful impurities in corundum brick castables; when exposed to water or stored in humid environments, they undergo hydrolysis, releasing methane (CH4) and causing the corundum particles to disintegrate. Moreover, they also undergo acid dissolution upon reaction with acids. Consequently, castables or ramming masses made from corundum raw materials containing carbides will crack during firing.

Return to list