Categories
Alpha-Beta Brick
Cast α-β-Al2O3 material contains approximately 45% α-Al2O3 and 55% β-Al2O3 phases, with impurity phases accounting for about 1% and porosity at around 2%. Cast β-Al2O3 material consists primarily of coarse-grained β-Al2O3, with negligible impurity phases and a porosity of roughly 4%. Cast α-β or β-Al2O3 materials contain neither glassy phases nor refractory crystalline phases, thus having no adverse effects on glass quality. Moreover, they exhibit excellent resistance to attack by soda-lime glass or alkali vapors below 1350℃. Consequently, α-β-Al2O3 materials are widely used in cooling sections, while β-Al2O3 materials are employed in the upper structures of dust-free areas within cooling sections.
Keywords:
Alpha-Beta Brick
Category:
Product Description
Cast α-β-Al2O3 materials contain approximately 45% α-Al2O3 and 55% β-Al2O3 phases, with impurity phases accounting for about 1% and porosity at around 2%. Cast β-Al2O3 materials consist primarily of coarse-grained β-Al2O3, with negligible impurity phases and a porosity of roughly 4%. Cast α-β or β-Al2O3 materials do not contain any glassy phase nor refractory crystalline phases, thus having no adverse effects on glass quality. Moreover, they exhibit excellent resistance to attack by soda-lime glass or alkali vapors below 1350℃. Consequently, α-β-Al2O3 materials are widely used in cooling zones, while β-Al2O3 materials are employed in the upper structures of dust-free areas within cooling zones.

After being used for 4 to 8 years as the vault of an oxygen-fuel glass furnace, α-β-Al2O3 castable material has undergone virtually no noticeable changes. As vault bricks, α-β-Al2O3 castables can last at least two kiln campaigns. Therefore, α-β-Al2O3 bricks are the ideal material for the upper structure of oxygen-fuel glass furnaces.
Related products
Corundum ramming mass is a composite material made by finely proportioning and mixing high-quality corundum as the primary raw material, along with various binders, special-performance fine powders, high-temperature-resistant binders, crack-resistant agents, and anti-permeation additives. During vigorous ramming, this loose refractory material is shaped into a dense structure. It features high strength, stable high-temperature performance, excellent resistance to erosion, and superior chemical properties that provide good resistance to scouring and thermal shock.
Cast α-β-Al2O3 material contains approximately 45% α-Al2O3 and 55% β-Al2O3 phases, with impurity phases accounting for about 1% and porosity at around 2%. Cast β-Al2O3 material consists primarily of coarse-grained β-Al2O3, with negligible impurity phases and a porosity of roughly 4%. Cast α-β or β-Al2O3 materials contain neither glassy phases nor refractory crystalline phases, thus having no adverse effects on glass quality. Moreover, they exhibit excellent resistance to attack by soda-lime glass or alkali vapors below 1350℃. Consequently, α-β-Al2O3 materials are widely used in cooling sections, while β-Al2O3 materials are employed in the upper structures of dust-free areas within cooling sections.
Product Inquiry