Electrofused zirconia-alumina brick AZS-33#

The dense microstructure of AZS-33# zircon-corundum bricks gives them excellent resistance to glass melt erosion, making them less prone to forming scale or other defects in glass furnaces. They are among the most widely used products in glass kilns, primarily suitable for the upper structure of the melting pool, the wall bricks and facing bricks of the working pool, as well as the feeder channels.

Keywords:

Electrofused zirconia-alumina brick AZS-33#

Product Description

The dense microstructure of AZS-33# zircon-corundum bricks gives them excellent resistance to glass melt erosion, making them less prone to forming scale or other defects in glass furnaces. They are among the most widely used products in glass kilns, primarily suitable for the upper structure of the melting pool, the wall bricks and floor tiles of the working pool, as well as the feeder channels.

Related products

Corundum Ramming Mass


Corundum ramming mass is a composite material made by finely proportioning and mixing high-quality corundum as the primary raw material, along with various binders, special-performance fine powders, high-temperature-resistant binders, crack-resistant agents, and anti-permeation additives. During vigorous ramming, this loose refractory material is shaped into a dense structure. It features high strength, stable high-temperature performance, excellent resistance to erosion, and superior chemical properties that provide good resistance to scouring and thermal shock.

Alpha-Beta Brick


Cast α-β-Al2O3 material contains approximately 45% α-Al2O3 and 55% β-Al2O3 phases, with impurity phases accounting for about 1% and porosity at around 2%. Cast β-Al2O3 material consists primarily of coarse-grained β-Al2O3, with negligible impurity phases and a porosity of roughly 4%. Cast α-β or β-Al2O3 materials contain neither glassy phases nor refractory crystalline phases, thus having no adverse effects on glass quality. Moreover, they exhibit excellent resistance to attack by soda-lime glass or alkali vapors below 1350℃. Consequently, α-β-Al2O3 materials are widely used in cooling sections, while β-Al2O3 materials are employed in the upper structures of dust-free areas within cooling sections.

Product Inquiry