Categories
Electrofused zirconia-alumina brick AZS-36#
In addition to containing the same co-crystalline phase as AZS33# fused-cast zirconia-alumina bricks, AZS-36# bricks exhibit further enhanced resistance to corrosion due to the increased content of chain-like zirconia crystals and a lower glass-phase content. Consequently, AZS-36# fused-cast zirconia-alumina bricks are particularly suitable for areas with faster glass flow rates or higher temperatures.
Keywords:
Electrofused zirconia-alumina brick AZS-36#
Category:
Product Description
In addition to containing the same co-crystalline phase as AZS33# fused-cast zirconia-alumina bricks, AZS-36# bricks exhibit further enhanced resistance to corrosion due to the increased content of chain-like zirconia crystals and a lower glass-phase content. Consequently, AZS-36# fused-cast zirconia-alumina bricks are particularly suitable for areas with faster glass flow rates or higher temperatures.
AZS-36# bricks are high-performance products in the fused AZS series, featuring excellent resistance to glass melt attack and low contamination characteristics. They are typically used in critical areas such as the pool walls near the hot spots in the melting zone of glass furnaces.

Related products
Corundum ramming mass is a composite material made by finely proportioning and mixing high-quality corundum as the primary raw material, along with various binders, special-performance fine powders, high-temperature-resistant binders, crack-resistant agents, and anti-permeation additives. During vigorous ramming, this loose refractory material is shaped into a dense structure. It features high strength, stable high-temperature performance, excellent resistance to erosion, and superior chemical properties that provide good resistance to scouring and thermal shock.
Cast α-β-Al2O3 material contains approximately 45% α-Al2O3 and 55% β-Al2O3 phases, with impurity phases accounting for about 1% and porosity at around 2%. Cast β-Al2O3 material consists primarily of coarse-grained β-Al2O3, with negligible impurity phases and a porosity of roughly 4%. Cast α-β or β-Al2O3 materials contain neither glassy phases nor refractory crystalline phases, thus having no adverse effects on glass quality. Moreover, they exhibit excellent resistance to attack by soda-lime glass or alkali vapors below 1350℃. Consequently, α-β-Al2O3 materials are widely used in cooling sections, while β-Al2O3 materials are employed in the upper structures of dust-free areas within cooling sections.
Product Inquiry