Categories
Electrofused zirconia-alumina brick AZS-41#
The AZS-41# fused-zirconia-corundum brick, in addition to containing a eutectic mixture of silicon dioxide and aluminum oxide, also incorporates a higher concentration of uniformly distributed zirconia crystals. In the corundum brick system, it exhibits the highest resistance to corrosion. Therefore, it is selected for critical parts of glass furnaces to ensure that these parts have a service life comparable to other components.
Keywords:
Electrofused zirconia-alumina brick AZS-41#
Category:
Product Description
The AZS-41# electrofused zirconia-alumina brick, in addition to containing a eutectic mixture of silica and alumina, also features a higher concentration of uniformly distributed zirconia crystals. In the alumina brick system, it exhibits the highest resistance to corrosion. Therefore, it is selected for critical parts of glass furnaces to ensure that these parts have a service life comparable to other furnace components.
AZS41 is an outstanding product in the fused AZS series, boasting exceptional resistance to glass melt attack and an extremely high glass-phase leaching temperature. It causes minimal contamination of the glass melt. It is widely used in critical areas of glass furnaces, such as the pool walls at hot spots, corners of feed ports, flow channels, furnace sill lines, pool bottom bubbling zones, and all-electric melting furnaces.
Related products
Corundum ramming mass is a composite material made by finely proportioning and mixing high-quality corundum as the primary raw material, along with various binders, special-performance fine powders, high-temperature-resistant binders, crack-resistant agents, and anti-permeation additives. During vigorous ramming, this loose refractory material is shaped into a dense structure. It features high strength, stable high-temperature performance, excellent resistance to erosion, and superior chemical properties that provide good resistance to scouring and thermal shock.
Cast α-β-Al2O3 material contains approximately 45% α-Al2O3 and 55% β-Al2O3 phases, with impurity phases accounting for about 1% and porosity at around 2%. Cast β-Al2O3 material consists primarily of coarse-grained β-Al2O3, with negligible impurity phases and a porosity of roughly 4%. Cast α-β or β-Al2O3 materials contain neither glassy phases nor refractory crystalline phases, thus having no adverse effects on glass quality. Moreover, they exhibit excellent resistance to attack by soda-lime glass or alkali vapors below 1350℃. Consequently, α-β-Al2O3 materials are widely used in cooling sections, while β-Al2O3 materials are employed in the upper structures of dust-free areas within cooling sections.
Product Inquiry