Lift-and-Rotate Casting Technology

A liftable and rotatable casting platform is installed within the casting pit. By adjusting the platform’s elevation, it is possible to cast pool wall bricks with a maximum dimension of 3,500 mm. The circular platform rotates smoothly, allowing for flexible switching between casting modes and ensuring excellent casting continuity, which in turn maintains stable molten metal behavior within the sand mold. Moreover, the liftable and rotatable casting method enables precise control over casting time and casting speed, offering advantages such as improved brick density, effective prevention of brick cracking, and reduced occurrence of surface corrugations and knots on electrofused bricks.

Keywords:

Wanheng

Lift-and-Rotate Casting Technology

Product Description

A liftable and rotatable casting platform is installed within the casting pit. By adjusting the platform’s elevation, it is possible to cast pool-wall bricks with a maximum size of 3,500 mm. The circular platform rotates smoothly, allowing for flexible switching between casting modes and ensuring excellent casting continuity, which in turn maintains stable molten-metal performance within the sand mold. Moreover, the liftable and rotatable casting method enables precise control over casting time and casting speed, offering advantages such as improved brick density, effective prevention of brick cracking, and reduced occurrence of surface irregularities and knots on electrofused bricks.

Related products

Corundum Ramming Mass


Corundum ramming mass is a composite material made by finely proportioning and mixing high-quality corundum as the primary raw material, along with various binders, special-performance fine powders, high-temperature-resistant binders, crack-resistant agents, and anti-permeation additives. During vigorous ramming, this loose refractory material is shaped into a dense structure. It features high strength, stable high-temperature performance, excellent resistance to erosion, and superior chemical properties that provide good resistance to scouring and thermal shock.

Alpha-Beta Brick


Cast α-β-Al2O3 material contains approximately 45% α-Al2O3 and 55% β-Al2O3 phases, with impurity phases accounting for about 1% and porosity at around 2%. Cast β-Al2O3 material consists primarily of coarse-grained β-Al2O3, with negligible impurity phases and a porosity of roughly 4%. Cast α-β or β-Al2O3 materials contain neither glassy phases nor refractory crystalline phases, thus having no adverse effects on glass quality. Moreover, they exhibit excellent resistance to attack by soda-lime glass or alkali vapors below 1350℃. Consequently, α-β-Al2O3 materials are widely used in cooling sections, while β-Al2O3 materials are employed in the upper structures of dust-free areas within cooling sections.

Product Inquiry