Corundum Ramming Mass


Corundum ramming mass is a composite material made by finely proportioning and mixing high-quality corundum as the primary raw material, along with various binders, special-performance fine powders, high-temperature-resistant binders, crack-resistant agents, and anti-permeation additives. During vigorous ramming, this loose refractory material is shaped into a dense structure. It features high strength, stable high-temperature performance, excellent resistance to erosion, and superior chemical properties that provide good resistance to scouring and thermal shock.

Alpha-Beta Brick


Cast α-β-Al2O3 material contains approximately 45% α-Al2O3 and 55% β-Al2O3 phases, with impurity phases accounting for about 1% and porosity at around 2%. Cast β-Al2O3 material consists primarily of coarse-grained β-Al2O3, with negligible impurity phases and a porosity of roughly 4%. Cast α-β or β-Al2O3 materials contain neither glassy phases nor refractory crystalline phases, thus having no adverse effects on glass quality. Moreover, they exhibit excellent resistance to attack by soda-lime glass or alkali vapors below 1350℃. Consequently, α-β-Al2O3 materials are widely used in cooling sections, while β-Al2O3 materials are employed in the upper structures of dust-free areas within cooling sections.

Lift-and-Rotate Casting Technology


A liftable and rotatable casting platform is installed within the casting pit. By adjusting the platform’s elevation, it is possible to cast pool wall bricks with a maximum dimension of 3,500 mm. The circular platform rotates smoothly, allowing for flexible switching between casting modes and ensuring excellent casting continuity, which in turn maintains stable molten metal behavior within the sand mold. Moreover, the liftable and rotatable casting method enables precise control over casting time and casting speed, offering advantages such as improved brick density, effective prevention of brick cracking, and reduced occurrence of surface corrugations and knots on electrofused bricks.

Integrated Molding Technology


Sand molds produced using integrated molding technology offer numerous advantages, including high precision, great strength, short production cycles, natural drying, easy storage, excellent temperature resistance, strong permeability, and resistance to deformation. At the same time, this technology reduces the amount of mold plate machining, lowers labor intensity for workers, and boosts work efficiency. Brick products cast using these sand molds exhibit high density, low porosity, and are less prone to cracking, thereby enhancing product quality.

Electrofused zirconia-alumina brick AZS-36#


In addition to containing the same co-crystalline phase as AZS33# fused-cast zirconia-alumina bricks, AZS-36# bricks exhibit further enhanced resistance to corrosion due to the increased content of chain-like zirconia crystals and a lower glass-phase content. Consequently, AZS-36# fused-cast zirconia-alumina bricks are particularly suitable for areas with faster glass flow rates or higher temperatures.

Electrofused zirconia-alumina brick AZS-41#


The AZS-41# fused-zirconia-corundum brick, in addition to containing a eutectic mixture of silicon dioxide and aluminum oxide, also incorporates a higher concentration of uniformly distributed zirconia crystals. In the corundum brick system, it exhibits the highest resistance to corrosion. Therefore, it is selected for critical parts of glass furnaces to ensure that these parts have a service life comparable to other components.

Electrofused zirconia-alumina brick AZS-33#


The dense microstructure of AZS-33# zircon-corundum bricks gives them excellent resistance to glass melt erosion, making them less prone to forming scale or other defects in glass furnaces. They are among the most widely used products in glass kilns, primarily suitable for the upper structure of the melting pool, the wall bricks and facing bricks of the working pool, as well as the feeder channels.

< 1 > proceed page